By Kendall Smith, Induron Sales Rep

Let’s face it: when you’re trying to overcoat aged, failing coatings, badly weathered galvanized steel or even rusted carbon steel, linseed oil as a barrier coating needs all the fortification it can get.

Granted, modified linseed oil provides maximum wetting and penetration properties, as well as minimum curing stresses and disruption of the existing coating. But by itself, as a barrier coating, it would not hold out long against the elements (wind, rain, salt fog, sun, etc.).

So how do you get maximum barrier protection out of one high-build coat of modified linseed oil? Ask for it in the specification!

One purpose of a coatings specification is to be specific about what you want. High-build, properly pigmented linseed oil coatings have been providing excellent corrosion protection for 50 years when pigmented with functional pigments that provide an effective shield or barrier. Historically, once lead pigments were removed, those barrier properties have been best achieved with combinations of metallic zinc dust and other lamellar pigments, such as micaceous iron oxide and leafing aluminum.

When zinc is not used as galvanic protection (and at any concentration below 83 percent, it does NOT), it is best supplemented with platy-type pigments that orient themselves parallel with the substrate and overlap. These lamellar pigments align themselves much like mica. This lamellar formation creates a difficult pathway for the elements of corrosion to migrate through the system, and stops them from camping out on the vulnerable substrate, where corrosion cells will form and develop into pitting corrosion if moisture, salts and other corrosion inducers are left for any time at all.  Continue reading Let’s Face it – Linseed Oil Needs Help! →