To kick off 2020, Induron is excited to announce that its 2019 Project of the Year is the Texarkana Water Utilities Clarifier Rehabilitation. For the facility to effectively treat the potable water used in the surrounding community, Texarkana Water Utilities needed to rehabilitate a concrete clarifier in their Millwood Potable Water Treatment Plant in Ashdown, Ark. Continue reading Induron Protective Coatings Announces its 2019 Project of the Year
By: Paul Powers, Induron Sales Representative
In the summer of 2009, Bazan Painting Co. and Induron Protective Coatings teamed up to paint the 200-foot-tall Italgrani Flour Mill Elevator located on the Mississippi River in St. Louis Missouri. Continue reading Exceeding Expectations: A 10-year Case History of Aquanaut II High Performance Acrylic
By: Russell Hicks, Induron Sales Representative
This case study was originally published in Water & Wastes Digest.
Texarkana Water Utilities needed to rehabilitate a concrete clarifier in the Millwood Potable Water Treatment Plant in Ashwood, AR for the facility to effectively treat the potable water used in the surrounding community. Continue reading Case Study: Texarkana Water Utilities Clarifier Rehabilitation
Are color and gloss retention the priority for your project? Induron has the coatings solution for you. PermaGloss Fluorourethane provides the best color and gloss retention of any readily available industrial coating. Continue reading Product Spotlight: PermaGloss Fluorourethane
By: Russell Hicks, Induron Technical Sales Representative
When the city of Hominy, OK needed its 500,000-gallon ground storage tank rehabbed, they encountered a few challenges. First, maintenance had not been performed on the tank for more than 25 years. Plus, the interior of the tank was severely pitted with corrosion cells. And lastly, the owner requested that the tank have a white finish. Continue reading Project Spotlight: Hominy Ground Storage Tank Rehab
By: Nick Jones, Induron Sales Representative
In August of 2005, Louisiana suffered through more than 50 failures of its levees and flood walls following the passage of Hurricane Katrina and landfall in Mississippi. A levee is a natural or artificial wall that prevents water from flowing into certain areas. Levees are often used to increase available land for habitation, divert a body of water so the fertile soil of a river or seabed may be used for agriculture or prevent rivers from flooding cities in a storm surge. Continue reading Project Spotlight: Levee Repair in Lafayette
By: Nick Jones, Induron Sales Representative
Induron partnered with The Kelley Group and Robinson and Sons Construction to complete a rehabilitation of three existing ground storage tanks located in West Blocton, Alabama. The relationships we maintain with The Kelley Group and Robinson and Sons helped Induron secure this project, which demonstrates just how much relationships matter in the industrial coatings business. Continue reading Project Spotlight: West Blocton Tank Rehab
By: Nick Jones, Induron Sales Representative
Induron partnered with Garver Engineering and Robinson and Sons to complete this 3-tank exterior overcoat project in Helena, Alabama. These three tanks are the only ground storage tanks in Helena, so providing superior corrosion protection, extending the exterior warranty and making them aesthetically pleasing were the goals of this project. Continue reading Project Spotlight: Helena, AL Three-Tank Overcoat
Did you know Induron sells to international markets? Our Latin American representative presented Induron with the opportunity to provide products for this particular project in the coastal Colombian city of Baranquilla. Continue reading Project Spotlight: Magdalena River Crossing Transmission Towers
By: Kendall Smith, Induron Sales Representative
Twenty-five years ago, I lived near these high-voltage transmission poles in New Hampshire. Back then, they were not a pretty site to drive by. Without the proper coating, the poles were rusting, and OEM paint was peeling off them. Continue reading Ebond 100: The Solution for Rusty, Carbon Steel Structures