Success Story: Lancaster, PA Tank Repaint

Lancaster, PA Tank After RepaintWhen an iconic 7.5 million-gallon standpipe in downtown Lancaster, PA began to show signs of corrosion, Induron Sales Representative Tex Enoch provided a coatings recommendation. 

Enoch has a longstanding history with this particular tank. More than 40 years ago, Enoch supplied Chicago Bridge & Iron the paint for the original paint job. Twenty years later, he sold the paint required to maintain the tank. So, when the tank’s exterior began to show signs of corrosion in 2018, he was the expert to call.  

An initial inspection indicated that the interior of the tank required a complete re-lining, so Enoch recommended Induron’s line of innovative ceramic epoxy tank linings. Ceramic Epoxy refers to a unique pigment package that Induron adds to epoxy technologies, which are already ubiquitous in our industry. 

Lancaster, PA Tank Showing signs of corrosion

 

 

The coatings system

Enoch specified an interior coatings system of a thin-film prime coat, a brush applied seam coat of epoxy on all angles, edges and weld seams as well as a high-build finish of PermaClean 100 Ceramic Epoxy. For the standpipe’s exterior surfaces, Enoch recommended a complete commercial blast (SSPC SP-6) and a four-coat exterior system including Induron’s Perma-Gloss Fluorourethane. Perma-Gloss is a high-performance, chemical and stain resistant coating that performs well in a variety of aggressive environments. In fact, it provides the longest lasting color and gloss retention of any readily available industrial coatings. 

The proven track record of PermaClean 100

As a fast-curing, 100% solids epoxy tank lining for potable water applications, PermaClean 100 is ideal for top coating a range of previously-painted surfaces. It has been used on water tanks throughout eastern Pennsylvania with tremendous success for more than 10 years. Plus, contractors have testified about its user-friendly application qualities and lack of failures.  

Since launching PermaClean100, Induron has strengthened its position and industry leadership for potable water tank linings. PermaClean 100 provides unparalleled film build, ultra-low permeability, absolute minimal undercutting, and more. Available in a gloss blue finish, PermaClean 100 Epoxy meets AWWA D102 and AWWA C210 standards and is Ozone Transmission Commission (OTC Phase I and Phase II) compliant.

U.S. Tank Painting was awarded this project. The crew mobilized quickly to address the containment concerns and complete the repaint within the tight completion window and budget. This project proves that with proper maintenance, welded steel water tanks have a virtually limitless lifespan. 

Contact Induron Protective Coatings for a coatings solution

Induron has the right coatings solution to meet and exceed your needs for the corrosion protection of your assets and to provide a long lasting, aesthetically-pleasing appearance. For more information about ceramic epoxy technology, contact an Induron sales representative or visit their website: www.induron.com

Leave a Reply