Perma-Gloss Fluorourethane

Perma-Gloss LV Fluorourethane is a two-component, high solids, very low VOC, high gloss, fluorourethane coating that will substantially increase long-term color and gloss retention when compared to conventional urethane finish coatings. It is available in a virtually unlimited color range. Perma-Gloss Fluorourethane LV is a high performance, chemical and stain resistant coating which performs well in a variety of aggressive environments and is intended for use over recommended Induron primers and tie coats. This product meets the finish coat requirements of ANSI/AWWA D102-17 System OCS-4. Perma-Gloss Fluorourethane LV also contains a factory added mildewcide helping to mitigate mildew and other organic surface contaminants.

Perma-Gloss LV Fluorourethane represents the best the market has to offer for aesthetics and long-term performance. When tasked with protecting structures and substrates that are difficult and costly to remove from service, premium coating selection, such as Perma-Gloss LV Fluorourethane, can have a profound effect on the overall maintenance and life cycle cost for these applications.

With Perma-Gloss LV Fluorourethane, the LV stands for Low VOC. This product has very low volatile organic compounds (less than 100 g/L; 0.8 lb./gal mixed), making this product compliant for Volatile Organic Compounds Emission Standards for industrial maintenance coatings in the most stringent of environmentally regulated areas, such as the Ozone Transmission Commission (OTC Phase I and Phase II) and the South Coast Air Quality Management District (SCAQMD).

When looking for unique solutions to protect a variety of substrates from chemical exposures, corrosive environments and UV degradation, Perma-Gloss LV Fluorourethane is ideal for use in a variety of markets such as; chemical processing, power, offshore, petrochemical, pulp and paper mills, water/wastewater plants and others.

Where do you want to go? INDURON can help you get there.