When is overcoating the right choice for an aging structure, and how do you select a coating system that will deliver long-term protection?
For owners and operators of water tanks, wastewater treatment plants and other critical infrastructure, maintenance painting can be a cost-effective alternative to complete coating removal and replacement. But successful overcoating starts with knowing which structures are good candidates and choosing the right products for the job.
In the latest episode of the Induron Protective Coatings Podcast, President Davies Hood and National Sales Manager Andy Odorzynski discuss how to evaluate existing coatings, navigate surface preparation challenges and select primers and finish coats for lasting performance.
Is Your Structure a Good Candidate for Overcoating?
Not every aging coating system needs to be completely removed. Structures with sound, well-adhered existing coatings may be suitable for overcoating, even when some corrosion or deterioration is present.
The key is evaluating the condition of the existing coating, its adhesion to the substrate and the level of surface preparation that can realistically be achieved.
During the podcast, Davies and Andy explain how to identify coatings that can remain in place, when additional removal is necessary and why surface-tolerant products are especially valuable for structures with limited access or challenging geometries.
Selecting the Right Primers and Finish Coats
Once a structure has been evaluated, choosing the right coating system is critical.
Induron offers several solutions for maintenance painting, including E-Bond 100, Induramastic 85 and Indurabond, each designed to address different surface conditions and application requirements.
But selecting the right primer is only part of the equation.
From economical acrylics to high-performance polyurethane and fluorourethane finishes, the ideal topcoat depends on the structure’s environment, expected service life, budget and aesthetic requirements.
The conversation also explores Induron’s ongoing advancements in siloxane technology and how performance testing is helping shape the next generation of protective coatings.
Real-World Results and Long-Term Protection
What does successful overcoating look like in the field?
Davies and Andy share examples of coating systems that have protected structures for decades, including Induron’s work at the Hoover Met, where an existing polysiloxane coating was successfully overcoated with E-Bond 100 and PermaGloss.
These projects demonstrate the potential value of selecting compatible coating systems and addressing maintenance needs before widespread deterioration occurs.
Listen to the Full Podcast
From evaluating surface conditions to selecting primers and high-performance finish coats, there’s a lot to consider before beginning a maintenance painting project.
Listen in as Davies and Andy break down the options, share real-world experiences and discuss how to make smarter coating decisions that extend the life of critical infrastructure.
Have questions about overcoating or maintenance painting? Contact Induron to discuss your structure and find the right coating solution.

