Have you Seen AquaClean in the News Lately?

The news of our newest product is spreading quickly! AquaClean, our NSF Standard 61-approved potable water epoxy, was recently featured on AdhesivesMag.com, PaintSquare.com and in CoatingsPro magazine’s September Issue. 

AquaClean: The Chemistry Behind the Product

By: John Anspach, Induron Technical Director To ensure AquaClean’s performance matches its user-friendly and good-looking finish, many important design traits are formulated into the coating system. First, AquaClean is formulated to be compliant to the OTC (Ozone Transport Commission) standard for low VOC content.  Complying with OTC allows us to sell AquaClean in most U.S. … Continue reading AquaClean: The Chemistry Behind the Product

AquaClean: User-Friendly, Good-Looking and Long-Lasting

By: Davies Hood, Induron CEO Like most marketplaces, the industrial coating market becomes more and more competitive each day. Consequently, this competition cultivates an omnipresent sense of “We need to build a better mousetrap.” At Induron, our Research and Development Department is challenged with this exact task. With the help of our suppliers and partners, … Continue reading AquaClean: User-Friendly, Good-Looking and Long-Lasting

Induron Protective Coatings Announces its 2019 Project of the Year

To kick off 2020, Induron is excited to announce that its 2019 Project of the Year is the Texarkana Water Utilities Clarifier Rehabilitation. For the facility to effectively treat the potable water used in the surrounding community, Texarkana Water Utilities needed to rehabilitate a concrete clarifier in their Millwood Potable Water Treatment Plant in Ashdown, … Continue reading Induron Protective Coatings Announces its 2019 Project of the Year

Product Spotlight: Ceramasafe 90 Ceramic Epoxy

Ceramasafe 90 Ceramic Epoxy is the ideal solution for a wide range of wastewater and treatment plant applications. While Induron’s Protecto 401 Ceramic Epoxy has been the industry standard for handling untreated wastewater influent for decades, Ceramasafe 90 brings this same 35-year track record of ceramic epoxy performance to the rest of your treatment plant … Continue reading Product Spotlight: Ceramasafe 90 Ceramic Epoxy

Case Study: Texarkana Water Utilities Clarifier Rehabilitation

By: Russell Hicks, Induron Sales Representative This case study was originally published in Water & Wastes Digest. Texarkana Water Utilities needed to rehabilitate a concrete clarifier in the Millwood Potable Water Treatment Plant in Ashwood, AR for the facility to effectively treat the potable water used in the surrounding community.

Project Spotlight: Hominy Ground Storage Tank Rehab

By: Russell Hicks, Induron Technical Sales Representative When the city of Hominy, OK needed its 500,000-gallon ground storage tank rehabbed, they encountered a few challenges. First, maintenance had not been performed on the tank for more than 25 years. Plus, the interior of the tank was severely pitted with corrosion cells. And lastly, the owner … Continue reading Project Spotlight: Hominy Ground Storage Tank Rehab

Induramastic 85

In many coatings projects sandblasting to perfectly cleaned steel is not viable due to the proximity of other assets, the budget, or the project schedule. When marginal surface preparation is a project reality, Induramastic 85 is the perfect primer. Induramastic 85 is a high build, surface-tolerant epoxy formulated for excellent adhesion to clean steel, rusted … Continue reading Induramastic 85

Perma-Clean 100™ Ceramic Epoxy

Perma-Clean 100 is a fast-curing, 100% solids epoxy tank lining for potable water applications. It provides enhanced edge retention, which improves corrosion protection on corners and sharp angles. The high-build coating may be applied up to 50 mils DFT per coat. Competitive products are not enhanced with ceramic pigment into an amine-cured epoxy resin for maximum … Continue reading Perma-Clean 100™ Ceramic Epoxy